Contact Particle Measuring Systems for instrument repair or calibration
Our service technicians are well trained to calibrate your PMS instruments to the highest standards and our software-controlled approach automates critical steps that drive consistency in each calibration. This ensures the same calibration result and performance, consistent with the factory calibration, regardless of where the calibration is performed—anywhere in the world.
PMS™ calibration services for Particle Measuring Systems’ instruments include:
- Calibration and verification/validation and adjustments back to factory standards
- Calibration certificate issued with each instrument
- Preventative maintenance
- Technical and software support
- Instrument examination (as found and as left data available)
- NIST traceable
We offer a broad range of services designed to reduce costly downtime. Please contact us for information regarding the following services:
- On-site calibration at your facility
- Dedicated Particle Measuring Systems technician year-round at your facility
- Service contracts for on-site service and return to factory service
Aerosol particle counters must be calibrated to the exacting standard of ISO 21501-4:2018 which includes measurements to verify and set flow rate, counting efficiency, particle sizing, resolution, signal ratios and zero count. Each calibration is also completed using NIST-traceable standards, and a certificate of calibration is provided with each calibration.
We had an issue with our liquid particle counter last week and I couldn’t have asked for more from PMS Customer Service. When troubleshooting, they realized this was not an issue they’ve seen before. Rick H, who was on vacation at the time, took the time to accommodate not only the issue at hand, but he worked around our availability. A big thank you goes out to Rick and the entire Customer Service Department.
Thanks again for your assistance!Bret Barron
“I’m the Metrology Supervisor here at <confidential>. Rob Carter is our Field Service Technician for PMS. Rob has been an excellent service provider since he’s been coming to our site over the last few years. He provides great communication prior to his arrival and daily while on-site. He is very knowledgeable in answering any questions we have and also in calibrating/repairing equipment. He is always on time and works efficiently to service our equipment in a timely manner. It is a pleasure to work with Rob and I look forward to working together for years to come.“
Anthony Bettencourt
Sr. Supervisor, Metrology
