In Annex 1 Quality Risk Management (QRM) principles and risk-based approaches are prominent expectations. Risk-based approaches are mentioned 43 times in the draft reinforcing the importance of using Risk Based approaches in all aspects of sterile product manufacturing.
Here we highlight requirements related to Quality Risk Management that are specifically mentioned in Annex 1, including:
- Pharmaceutical Quality System Requirements (PQS)- Manufacture of sterile products
- Utilities Monitoring
- Viable/ Non Viable (V/NV) Environmental and Process Monitoring
Annex 1 Quality Risk Management – Principle Section 2
Section 2.2: Processes, equipment, facilities and manufacturing activities should be managed in accordance with QRM principles that provide a proactive means of identifying, scientifically evaluating and controlling potential risks to quality.
QRM priorities should include good design of the facility, equipment and process in the first instance, then implementation of well-designed procedures, with monitoring systems as the final element that demonstrate that the design and procedures have been correctly implemented and continue to perform in line with expectations.
Exclusively monitoring or testing does not give assurance of sterility. You must think holistically about your facility’s contamination control strategy.
Pharmaceutical Quality systems
Pharmaceutical quality systems should have three elements:
Systems and procedures
- Processes, equipment, facilities and manufacturing activities should be managed in accordance with QRM principles that provide a proactive means of identifying, scientifically evaluating and controlling potential risks to quality.
Risk Management System
- There is an effective risk management system integrated into the product life cycle to minimize microbial contamination to ensure the safety, quality and efficacy of sterile manufactured product, including assurance of sterility
Risk Assessments
- Risk Assessment is performed to identify, assess, eliminate (where applicable) and control contamination risks to prevent contamination, …and to establish process requirement and acceptance criteria for all elements of a sterile manufacturing process.
Learn more about this topic by reading the next Particle Measuring Systems (PMS) blog on Quality Risk Management- Annex 1 section 6.1.
Learn how the Particle Measuring Systems (PMS) Cleanroom Contamination Control Advisory Services Team can help you conduct a Risk Assessment.
Learn about Particle Measuring Systems (PMS) particle counters, microbial monitors, and data management solutions for your cleanroom monitoring needs.
In the next blog in this series we will continue to examine Annex 1 and QRM principles and areas where those are discussed.
Want to read more? Jump to other released posts in this series:
- Part 1 of 5, April 23: Quality Risk Management- Principle Section 2 (you are here!)
- Part 2 of 5, April 24 Quality Risk Management- Annex 1 section 6.1
- Part 3 of 5, April 28 V/NV Environmental and Process Monitoring- Annex 1, Section 9.4
- Part 4 of ,5 April 30 Definition of potential sampling points
- Part 5 of 5, May 1; Process Risk Assessment
See links to additional Particle Measuring Systems (PMS) supporting resources below:
- Paper: Choosing the Most Suitable Particle Sample Point Locations in the Cleanroom
- On-Demand Webinar: Case Study: Developing an Isolator Filling Line using a Quality Risk Management Approach
- Blog series: How to Achieve Quality by Design (QbD) in a new Pharmaceutical Fill Line: Intro and Regulatory (Series Part 1 of 6)
Don’t miss an episode of this PMS series. Register for updates on the right column of this page. Click here to contact our Experts for questions.
