- Customer Support
- Technical Papers
- Basic Guide to Particle Counting
- Technical Support
- Service/Calibration Scheduling
- FAQ
- Airborne Particles
- Liquid Particles
- Pharmaceutical/Life Sciences Particle Counting
- Counter Height
- Cleanroom Qualification
- Monitoring Time
- Tubing Change
- ISO Hospitals
- Software Validation
- L2 550L Sample Volume
- Tube Length
- Pathogen
- Solds
- CleanroomVerification
- Particle Count Frequency
- ISO8
- GMP testing
- Compressor
- EU GMP 1
- IQ/OQ
- method validation
- Monitoring for 0.5um & 5.0um particles
- Support Docs
- HVAC Certification
- HVAC SYSTEMS
- Probe Height
- Stopper Bowl
- Filling Line
- Airnet Class 5
- Capping Station
- Cubic Meter Certification
- Isolated Excursions
- Sample point placement
- 797 Effective
- USP 797 Enforcement
- Clothing
- IV Solutions
- Pharmaceutical Net
- Valiation vs. Certification
- EU GMP Annex I 2007
- 1986 Specifications
- SamplePoints
- 1986 v 1995 Specs
- Dry Powder FMS
- Powder Collection Height
- Powder FMS
- Powder Regulations
- Powder SOP
- aqueous
- Microbial
- Particle Counter Service
- Molecular Monitoring
- Gas Analysis
- Software
- General
- Newsletters
- Store
- Particle Counters
- Microbial Air Samplers
- Molecular Monitors
- Services
- Rentals / Leasing
- Company News
FAQ - Pharmaceutical/Life Sciences Particle Counting
Submit a New QuestionAPSS-200 Particle Counter for Injectables
- Question
Is the APSS-200 suitable for aqueous and non-aqueous solutions? - Answer
The APSS is suitable for injectable testing. For dry powders they must be reconstituted with water, as per normal instructions for delivery. If what you have is a viscous fluid then the flowrate may need to be reduced or a dilution must be applied.
Privacy
content Copyright © 2002-2008 Particle Measuring Systems, Inc.
Information on this website is subject to change without notice.
