PRODUCTS

Nanoparticle and Microparticle Characterization

The field of aerosol science and technology is undergoing significant changes as global interest in ultra-fine particles expands to meet the evolving needs of the research community and industry. Traditional applications in environmental studies, safety, and metrology to name a few, have been well served with laboratory style instruments. These products provide single-particle detection limits for sizes as low as a few nanometers, and are configurable to provide flexibility for concentration, flow, and the aerosol range of interest. Similarly, characteristics which have been associated with these capabilities include a degree of complexity, high capital cost, specialized operator training requirements, and measurement and analysis largely confined to the laboratory.

This new collection of products provide the performance of laboratory grade instrumentation but are specifically designed for the Application-Based needs of occupational hygienists, toxicologists, environmental researchers, metrologists, manufacturing process and quality control groups.

Aerosol Science Brochure
Download the full Aerosol Science Brochure

Particle Characterization

Nano-ID™ Nanoparticle Spectrometer

Particle size distributions from 5 nm to 500 nm
Operator-selectable dual function Particle Counter Mode - operates as 5 nm portable particle counter
Non-radioactive particle charging source
Fast scan speeds giving reliable results in as low as 30 seconds

Nano-ID Select Wide Range Aerosol Sampler

Wide range aerosol sampler fractionates particles into 12 size channels from 2 nm to 20 μm
Minimal channel overlap over the entire dynamic range
Portable, self-contained package permits sampling in any location, weighs only 11 kg
Size-resolved samples are not altered, permitting compositional analysis using ICP-MS, AAS, and SEM/TEM
Built-in timer provides delayed start, programmed interval sampling, and auto stop

Nano-ID Mass Reader MR250

Accessory to the Nano-ID Select; provides the ability to create a size-resolved mass distribution within minutes after sampling
Mass readings from 250 nm to 20 μm
10 ng sensitivity exceeds gravimetric methods by an order of magnitude
Portable and battery operated, ideal for field use
Optical measurement preserves samples for additional compositional analysis

N
E
W

Lasair® III Particle Counter

The Lasair III particle counter is ISO 21501 compliant through the use of an on-board PHA. Its large IR touch screen with simplified user interface makes the new standard for particle counters.

Model

310
350 L
5100

First Channel

0.3 µm
0.3 µm
0.5 µm

Flow Rate

1 CFM
50 LPM
100 LPM

Handheld Particle Counter: Handilaz® Mini

This handheld particle counter provides a low
cost alternative for spot monitoring.

Model

Fist Channel

0.3 µm

Sample Volume

0.1 CFM

Adjustable Aerosol Dilutor, model ULP100

Designed to minimize the system pressure drop resulting in negligible particle transport loss from the inlet to the optical particle counter
Compact and easy to install

Particle Generation

N
E
W

Nano-ID™ Particle Mobility Classifier PMC500

Create monodisperse aerosol distributions from 5 nm to 500 nm
User-selectable aerosol flow rates from 0.1 LPM to 0.5 LPM
Easy to maneuver touch screen interface
Self-contained package eliminates complicated instrument inter-connections
Portable, weighs only 6.25 kg

Powder Aerosolizer, Model PA100

Model PA100 generates an aerosol from any powder – highly stable ultrafine and primary particle concentrations; low sample consumption
Portable and simple to operate; no special training required

Naneum Aero NG100 and MG100 Particle Aerosolizer

NG100 and MG100 Particle Generators

Model NG100 used for generating chromium oxide nanoparticles in the range of 1 nm to 10 nm
Model MG100 used for generating organic aerosols in the range of 500 nm to 3 µm
Both models are portable and simple to operate; no special training required

Unipolar Corona Charger

The C2000 Unipolar Corona Charger is a companion product to the Nano-ID PMC500 Particle Mobility Classifier, as well as a stand-alone laboratory accessory for particle size selection and behavioral studies.

Works over the range of 2 nm to 1 μm
>50% charging efficiency at 50 nm
Excellent long-term stability
New design eliminates periodic maintenance
Flow rates up to 0.5 LPM
Self-contained and portable

Without Measurement There Is No Control

Information on this website is subject to change without notice.