Liquid Optical Particle Counter: HSLIS M50e Particle Counter
The HSLIS e-series particle counter provides continuous real-time monitoring of particle contamination levels in DI water and process chemicals. The combination of high sensitivity and low cost make it ideal when large numbers of sensors are required. They provide sizing sensitivity down to 0.05 microns in DI water.
Contact us for a quote or more information.
Download the HSLIS E Particle Counter spec sheet... (211.4 KB)
- Respond immediately to particle events with continuous real-time particle monitoring
- Improve yield with the detection of particles with the highest sensitivity particle counters
- Simplify site-to-site comparisons with industry standard liquid DI water particle counter
- Lower overall costs with the control and monitoring of multiple particle counters with existing Ethernet networks
- Low initial capital investment and lower maintenance cost with proven reliability of the HSLIS design
- Quantifying particle concentrations in UPW systems
- Particle monitoring chemical delivery systems
- Filter efficiency measurements
- Detecting bacterial growth in DI water systems
- Episodic particle event tracking and alarming
- Continuous system particle monitoring
- Acid Leaching During Component Production
- Basic Guide to Particle Counters and Particle Monitoring
- Particle Counters for DI Water Systems
- Particle Counting Statistics in DI Water
- Particle Distribution Calculator for Liquid Particle Counters
- Particle Monitoring for Process Gas Molecular Contamination Using Surface Acoustic Wave Technology
- Which Particle Counter is Best for You? Measurement of DI Water and Fluids
- What are some typical particle distributions for particle counters?
- What is the optimum operating pressure for the HSLIS M65e particle counter? i.e. the incoming chemical at the inlet.
Contact us if you need more information or have questions.
Learn more about our microcontamination monitoring services.
The table below shows how the sample volume rate differences between particle counters affects the time needed to measure a specific volume of fluid. If the particle concentration is 0.5 particeles/mL, only 20 particles will normally be detected in a 40 mL volume.
| Particle Counter |
Sample Volume |
Time to Measure 1L Fluid |
Time to Measure 40mL Fluid |
|---|---|---|---|
| Ultra DI® 50 particle counter | 3.75 mL/min | 4.4 Hours | 10.6 minutes |
| HSLIS M50 particle counter | 0.25 mL/min | 2.8 Days | 2 Hours 40 minutes |
| Competitors | 0.1 mL/min | 6.9 Days | 6 Hours 40 minutes |
The HSLIS e-series product line of non-volumetric particle liquid monitors and spectrometers measure filter efficiency and particle contamination in ultra pure water and process chemicals. Sizing thresholds for the HSLIS family start at 0.05 µm for DI water and 0.065 µm for process chemicals with flow rates ranging from 100 to 300 ml per minute. The particle counter are available with 4 sizing channels. The spectrometers incorporate 16 sizing thresholds and offer exceptional resolution for research and quality control applications where stringent standards are required.
This particle counter is CE certified.
Information on this website is subject to change without notice.
