Collecteurs d'aérosols pour les compteurs de particules

AVANTAGES

• Cost Effective:
• Most economical monitoring of fixed points at timed intervals; lowest cost per sample location
• Ability to sample much larger area than single particle counter
• Ethernet communications to facility monitoring system
• Flexible:
• Has an easily programmed sampling routine, whether simple or complex sequences
• Automatically changes sampling recipe upon receiving alarm or external signal
• Easily replaces older AM 12/24/30 manifolds
• Has large coverage radius: Each sampling point can be up to 125 feet away
• Rapid and Accurate Measurements:
• Using LASAIR® II's patented flow control, this is the only manifold that properly compensates for manifold pressure drop eliminating systematic particle undercounting of up to 15%
• Maintains constant flow (nominal 3 CFM) at each sample location to minimize gravitational settling
• With isokinetic sampling probes, captures particles at same velocity as sample air, preventing distortion in particle size relationships

APPLICATIONS

• Facility particle monitoring
• Monitoring large minienvironments
• Cleanroom verification and trend analysis

Click here to signup and download files (Aerosol Manifold II)

Contact us if you need more information or have questions.

Learn more about our microcontamination monitoring services.

Air sampling at various locations within a cleanroom facility can be performed effectively using an aerosol manifold. There are two methods for using this device. One approach is multiplexing sample air from a number of sample locations into a single particle counter. This procedure offers the most economical way to monitor multiple points at timed intervals.

Another approach is to use a particle sensor that continuously monitors the mixed air from the individual sampling points while using an aerosol manifold and particle counter. When the sensor detects a rise in counts from the mixed air which exceeds a predetermined alarm level, the particle counter will examine each manifold port to locate the problem.

Each manifold can be programmed for single sampling at one location or executed in a user-defined sequence. The aerosol manifolds are designed to achieve a consistent flow rate of 3 CFM at each sample location.

This particle counter is CE certified.