FAQ - Contador de partículas de líquidos
Envíe una nueva pregunta- Pregunta
Bubbles in my solution result in imperfections in my product. Is there a particle counter that can measure them? - Respuesta
This is common in platting type applications where bubbles prevent proper plating. All of our liquid particle counters will count the bubbles; in fact, any contaminant with a refractive index different from the solvent will reflect light and therefore be recorded as a particle. Inline or syringe samplers with 0.5 micron sensitivity would work well for this application. Our compression samplers on the other hand, compress the sample prior to taking the reading to help reduce false counting bubbles as particles; for this reason, these instruments would not be recommended for this application.
- Soporte al cliente
- Soporte técnico
- Boletín informativo
- Preguntas frecuentes
- Partículas del aire
- Contador de partículas de líquidos
- Is it possible to perform in line particle counting in a emulsion when passing through a pipe at 450 litres / minute?
- Bubbles
- CLS Height
- Distribuciones de partículas
- Flow rate
- PSLs
- Período de estabilización
- Plumb
- Post Service
- Stable counts
- Statistically valid
- Surfactants
- Surfactant miscibiity
- Colored Chemical
- Cleaning
- Compression Sampler Settings
- DC Light
- Software
- LaminarCabinet
- Counts/mL Reading
- APSS 200 parameters
- Particles per mL
- Liquistat Nitrogen needed
- HSLIS Pressure
- Conteo de partículas en producción farmacéutica y ciencias de la vida
- Servicio de contadores de partículas
- Monitoreo molecular
- Análisis de gases
- General
- Documentos técnicos
- Contadores de partículas
- Monitores moleculares
- Servicios
- Alquiler y Arriendo
- Noticias y boletines de prensa
© 2002-2008 Particle Measuring Systems, Inc.
La información sobre este sitio web está sujeta a cambios sin aviso previo.