Sensitivity range: 0.5 - 5.0 µm

Simplifies air particle monitoring for remote locations

IsoAir® 310P Air Particle Sensor

The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with a Hepa filtered exhaust. It has unparalleled performance in a chemical-resistant and easy-to-disinfect 316L box, and the passivated stainless steel surface has well defined microbial control characteristics. The clean, reliable internal pump lowers installation costs and the need for costly vacuum system connections; the instrument is available with a wide range of communications protocol such as Ethernet, Modbus, OPC, Wifi, Analog 4-20mA for full compatibility with the existing monitoring system.

Read more

Hide

Features

  • Four standard channel sizes with two-channel pharmaceutical mode
  • Flow rate of 1.0CFM
  • Passivated 316L stainless-steel enclosure
  • Automatic shutoff for capped probe, flow sensing
  • Compliance with ISO 21501-4 and CE standards
  • Two local LEDs for status and activity, easy to see and understand status lights
  • Optional 4-20 mA inputs allow for integration of up to three environmental input sensors
  • Queues 3,000 samples in the event of computer system failure
  • Available validation documentation

Benefits

  • Ethernet, Modbus, OPC and 4-20 mA outputs meet 21 CFR Part 11 regulations for data transmission security
  • Identifies breakdown in isolator protection
  • Interfaces with optional FacilityPro, Pharmaceutical Net or FacilityNet software for comprehensive management of the cleanroom
  • Automatic paging allows rapid response to alarms
  • Easy to remove sensor simplifies calibration and service
  • Diode laser reduces maintenance requirements
  • Pump with HEPA filtered exhaust protects from creation of more particles

Applications

  • Pharmaceutical manufacturing area
  • Isolator monitoring
  • Cleanroom monitoring
  • Aerospace and industrial applications
  • Trend analysis
  • Statistical process control

Available Accessories

Facility Net Software

Facility Net Software

Facility Net Software provides a solution for comprehensive environmental monitoring, including a real-time and historical data display. Compatible with Particle Measuring Systems particle counters and molecular contamination monitors, as well as various third-party products.

FacilityPro® Software

FacilityPro® Software

FacilityPro® Software provides the interface, data management, and reporting for an environmental monitoring system. FacilityPro's ability to manage viable, nonviable and environmental data through a common system improves the efficiency of production operations and quality investigations.

Differential Air Pressure Sensor

Differential Air Pressure Sensor

The Differential Air Pressure Sensor allows for accurate measuremement of air with a range of 0 to 0.25in (0 to 6.35mm) of water. Current output: 4-20mA.

Related Products

Airnet® II 4 Channel Air Particle Sensor

The Airnet II 4 Channel Air Particle Sensor measures the size and number of particles suspended in the air for real-time monitoring of defect-causing...

Airnet® II and IIs 2 Channel Air Particle Sensors

The Airnet II and IIs 2 Channel Air Particle Sensors measure the size and number of particles suspended in the air for real-time monitoring of defect-causing...

FacilityPro® Environmental Monitoring System

The FacilityPro Processor is the central hub for an environmental monitoring...

Still have Questions?

Our customer support is ready to answer your questions or get a quote ready for you.

Contact Customer Support Request a Quote